Alloy 718 (2.4668) has a very good creep resistance. Besides the good short-and long-term mechanical properties - especially at low temperatures -, it has a high fatigue strength and offers a very good weldability in the application of arc and resistance welding processes. Alloy718 is not susceptible to weld cracking. Alloy 718 is an age-hardenable alloy. By heat treatment an increase in strength can be achieved.
|EN Material Symbol||NiCr19Fe19Nb5Mo3|
Alloy 718 was originally developed for the aerospace industry, and is now not only used in engines, gas turbines, or other components of the aircraft industry, but also in nuclear reactors, springs and high-strength bolts. In the oil and gas industry Alloy718 is also very popular because of its corrosion resistance and strength.
|%||≤ %||≤ %||≤ %||≤ %||%||%||%|
|%||%||%||≤ %||≤ %||%||%||≤ %|
|Temperature Range||High Temperature Range / Material for Wet Corrosion|
|Melting Range||1260 - 1340°C|
|ISO-V notch impact toughness at -59°C||Across < 47 J/cm²|
|lengthwise < 71 J/cm²|
Alloy 718 is recommended itself as filler material.
Sheets and plates 0.8mm < 80mm thickness
Bars / Billets dia. mm
12.7 - 101
With short delivery time:
plates or sheets, tubes, flanges, forged or die-cut rings and round blanks, elbows, T-fittings, reductions, screws, nuts or washers according to your request. According to your individual wishes, we are able to cut our material with our plasma- or water jet cutter. Our material is stocked in superformats of 2000x6000mm. Cut to size on request.
ECONOXX.com offers buyers a new and uncomplicated procurement channel, which also includes small quantities and materials in special alloys at favourable conditions.
powered by Hempel